| AKEMI AK1 Basis-Kristallizer (5 Liter)
Description
Characteristics:
Akemi's Basic Crystallizer AK1 (product color: Blue) is a special-purpose liquid product, based on high quality fluorosilicate agaents, which is ready to use. It is characterized by the following properties:
Polish of marble, lime stone, terrazzo, not a coating
Increases the degree of lustre
Reduces the hazard of slipping
Improves the stone surface
Reduces absorption of dirt, therefore easier to take care of
Color and structure intensification
Ideal for re-polishing old, worn-off floor coverings
Easy Application
Low pollution through noise, dirt and dust during application
Application Areas:
Akemi basic crystallizer AK1 is used to improve the surface and the appearance of new as well as old floor coverings made of limestone (e.g. marble, travertine) and cement-bound cast stone (e.g. terrazzo)
Instructions for Use:
Shake well before use
In the case of old, strongly scratched surfaces, it is recommended to abrade the surface (up to grain-size 400) first. Holes or damages should be filled with AKEMI stone fillers
The surface must be clean, dry and free of any coatings
Best working temperature: 15-25° C; avoid direct sunlight and turn off underfloor heating
Only treat small areas of 2-3 m² at a time
Evenly apply approx. 10-20 ml/m² of AKEMI'S basic crystallizer AK1 witha manual pump spray. Immediately afterwards begin polishing crosswise with a heavy, slowly-rotating single-plate machine and a fine steel wool pad. Continue polishing over and beyond the drying phase until the desired degree of lustre has been achieved. Repeat the process once or twice, if necessary
The lustre can be increased even more by treating the stone with AKEMI'S finish crystallizer AK2 afterwards
When you have finished, any resulting dust can be swept or vacummed away
The surface can be walked on immediatley after the treatment
AKEMI's mild stone soap can be used for general cleaning purposes
Special Notices:
Surfaces or objects (such as furniture) which are not to be treated should be covered up or masked beforehand
Metal objects may react in contact with the product and discolor
In order to avoid rust stains, it is recommended to use stainless steel pads
If you interrupt your work, make sure that there is no contact between the steel wool pad and the floor
Change the pads if the degree of soiling requires it
Use a separate pad for each crystallizer
Do not let the product get into direct contact with plants. If this should happen rinse with water immediately. Neither concentrated nor diluted solutions should get into contact with flora
Very good durability after approx. 3-4 months on surfaces that are exposed to high stress (e.g. entrance area hotels). Re-apply latest after 6 months.
Technical Specifications:
Coverage: 10-20 ml/m²
Color: BLUE
Density: Approx. 1.09 g/cm³
pH Value: Approx. 2
Shelf Life: Can be stored for approx. 1 year in the closed original container uder cool and frost-free conditions.
|
