|
Akemi Graffiti-Remover (1 Liter)
Characteristics:
AKEMI’s Graffiti-Remover is free of acids, alkalines and hydrocarbon chlorides and is based on highly-effective solvents which remove aerosol spray graffiti and the like from unprotected mineral bases and other solvent-resistant sur-faces. The product has the following particular properties:
Field of Application
AKEMI’s Graffiti-Remover is a cleaning agent for the removal of graffiti or simi-lar aerosol paints from façades, building, monuments etc. It is especially suit-able for all mineral bases such as natural and artificial stone, concrete, bricks, clinker, sand-lime bricks, plaster etc.
Instructions for Use
1. The surface must be dry.
2. The best working temperature lies between 10° - 30°C; direct sunshine should be avoided.
3. The product is to be evenly applied with a paint brush.
4. In order that the product can take effect it must remain on the graffiti for 10 – 15 minutes. The softened paint can then be washed off with hot water jet with a temperature of 120° - 140°C and a pressure of 20 bar. The water from rinsing must be collected and disposed of accordingly to the local au-thorities waste water regulations.
5. In particularly hard and stubborn cases a second treatment may be neces-sary. AKEMI’s Graffiti-Remover is then to be applies with a scrubbing brush with natural bristles, left for a longer period in order that the product can take effect and the washed off.
6. After cleaning it is recommendable to treat the surfaces with a coating of AKEMI’s Anti-Graffiti as a prophylactic measure against further defilement.
Special Hints:
This product acts in contact with painted surfaces aggressively and is not suit-able for the cleaning of wood (hazard of swelling) or plastics which react in con-tact with solvents. In uncertain cases tests should be carried out on an incon-spicuous place. The cleaning of vertical surfaces with steam jet should proceed from the bottom to the top because down-flowing water washes off the cleaner and can thus reduce the effect. On coarse surfaces with open pores (e.g. fine sandstone) traces of paint may remain despite intensive cleaning.
Technical Data
Coverage: 500-100g/m2
Colour: milky-transparent
Consistency: gel-like, stable
pH value: approx. 6
Density at 20°C: approx. 1g/cm3
Shelf life: Storable for approx. 1 year under cool and dry conditions its tightly closed original container.
|
